4G LTE-A Outdoor Router
The Zyxel LTE7461-M602 4G LTE-A Outdoor Router is good for any venue like suburban areas, rural area, public locations, homes, and offices. Enjoy 4G LTE-Advanced technology effortlessly with the LTE7461-M602.
- Cat. 6, DL 300 Mbps
- DL 2x2 MIMO
- 802.3af/at PoE
- IP68-certified
- Bridge/router
- Remote management
- Zyxel mobile app
Lightning-fast internet connectivity
The Zyxel LTE7461-M602 employs 3GPP UE Category 6 – the best-practice LTE technology with downlink data rates of up to 300 Mbps through 4 Spatial Streams on two component carriers.
Easy installation with Zyxel mobile app
Easy installation is realized with a flexible wall or pole mounting kit, integrated 802.3af/at PoE injector support, and dedicated WiFi interface. The LTE7461-M602 connects to Zyxel’s mobile app with intuitive RF signal strength graphics for base station alignment.
Built-in 2x2 MIMO high-gain antenna
The LTE7461-M602 provides 2x2 MIMO high-gain antennas of up to 8 dBi per element that work effectively in outdoor environments. The outdoor design enables it to work under near non-line-of-sight conditions to increase coverage and bandwidth as well as to eliminate edge corners having difficulty accessing good signals.
Non-stop connectivity with LTE 2nd WAN for failover
The wireless LTE allows you to take advantage of the 2nd WAN without a cabling plan. As long as the gateway supports “Multi-WAN Failover”, you can just connect the LTE7461-M602 to the existing gateway and set LTE as the failover WAN and relieves the risk of network outage due to the dependence on a single WAN connection.
Remote management, TR-069, HTTP/Web GUI and FTP
Through the LTE radio interface, the LTE7461-M602 supports TR-069, remote GUI and remote FTP to be fully configurable and software upgradeable through events triggered by the operators. Thanks to TR-143 remote throughput testing, the troubleshooting can be performed remotely with better efficiency. Additional support TR-069 with TR-181 issue-2 data model also enhances service providers’ visibility on subscriber LAN networks for improved customer assistance.
Related solutions
System Specifications
IP Networking
- Supports IPv4/IPv6 dual-stack (NDP IPv6)
- DHCP server
- ICMP supported
- Virtual Private Network (VPN) passthrough
- Supports NAT/NAPT
- Supports DMZ
- Supports port forwarding/triggering
- Supports ALG
Routing
- Supports bridge/router modes
- Supports dynamic DNS for first APN
- Supports remote management under bridge mode
IP Firewall
- Firewall can be enabled or disabled via GUI
- DoS attack detection
- Supports SPI
- Application-level Firewall
- Filters LAN MAC address
- Filters LAN IP address
- Filters URLs
Management
- Supports local/remote device management and firmware upgrade via TR-069 and Web GUI
- APN management
- PIN/PUK management
- Network selection
- Network preference
- Operating frequency band selection
- CLI/SSH (local and remote SSH access)
- Supports UPNP IGD
- Supports SSH with key access
- Supports bandwidth management
- Supports mobile app (iOS and Android)
- Supports remote throughput testing (TR-143)
- LTE Band Pilot System management compatible
Hardware Specifications
LTE Interface
- Standard-compliant: 3GPP UE Category 6
- Supports LTE bands: 2/4/5/7/12/13/25/26/29/66
- Supports WCDMA bands: 2/4/5
- Peak data rate:
LTE-FDD: max 300 Mbps (DL) max 50 Mbps (UL)* - 2 DL Carrier Aggregation combination:
B2+B2/B5/B12/B13/B26/B29; B4+B4/B5/B12/B13/B26/B29; B7+B5/B7/B12/B13/B26/B29; B25+B5/B12/B13/B25/B26/B29; B66+B5/B12/B13/B26/B29/B66; (B29 is only for secondary component carrier) - LTE antennas: 2 embedded directional antennas of up to 8 dBi/element (2x2 MIMO)
- Supports DL modulation QPSK, 16-QAM, 64-QAM
- Supports UL modulation QPSK and 16-QAM
- Max EIRP 30 dBm
Power Consumption
- 13 watt (peak) – at PoE
Physical Specifications
Hardware Interface
- One GbE RJ-45 PoE LAN port
- One tri-color LED indicator for
- Power status
- Internet status
- WiFi status
- One WiFi On/Off and WPS button
- One 3FF micro SIM card slot
- One Reset & Reboot default button
Power Interface
- Standard IEEE 802.3af/at PoE PD support compatible
WiFi Interface for Management
- 802.11 n/g/b, 2.4 GHz
- Hidden SSID
- MAC address filtering
- 2x2 embedded antennas
- For local management purpose only
Physical Specification
- Dimensions (WxDxH): 254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
- Weight: 1100 g (2.43 lb.)
- Package dimensions (WxDxH): 420 x 280 x 108 mm (16.54” x 11.02” x 4.25”)
- Package weight: 3050 g (6.72 lb.)
Environmental Specifications
Ingress Protection Rating
- IP68
Lightning Protection
- K.21 enhanced mode, 6 kV
Operating Environment
- Temperature: -40°C to 60°C (40°F to 140°F)
- Humidity: 5% to 95% (non-condensing)
Storage Environment
- Temperature: -40°C to 70°C (-40°F to 158°F)
- Humidity: 5% to 95% (non-condensing)
Certification
- FCC/IC/AT&T/Verizon
Package Contents
- Gigabit PoE injector with LED indicator
- Ethernet cable
- Power cord
- Cable gland
- Quick Start Guide
- Wall/pole mounting kit
*Please note that all specifications are subject to change without prior notice.
