4G LTE-A CBSD Category B Outdoor Router

Zyxel LTE7485-S905 4G LTE-A Outdoor Router with the support of Cat. 16 and 3.5 GHz CBRS band is a CPE-CBSD Category B with maximum 36 dBm per 10 GHz channel EIRP and SAS client built-in. Deliver lightning-fast internet connectivity through Fixed Wireless Access (FWA) with a better signal performance over extended distances.

SAS approved: Certified by Commscope, Federated Wireless, and Google.

Learn more about Zyxel CBRS Solutions >

  • Cat. 16/DL 580 Mbps
  • SAS-client
  • DL 4x4 MIMO
  • 802.3af/at PoE
  • Remote management
  • IP68-certified
  • Zyxel mobile app

Lightning-fast internet connectivity

Zyxel LTE7485-S905 employs 3GPP UE downlink Category 16 – the high-level practice LTE-A technology with data rates of up to 580/30 Mbps through 8 spatial streams on 2 component carriers.

Enhance your service coverage with high-gain antennas

The FCC certified LTE7485-S905 and built-in SAS (Spectrum Access System) client allows you to increase your service reach because of high-power signal transmissions and 4x4 MIMO high-gain directional antenna of up to 13 dBi per element. The outdoor design enables it to work under near non-line-of-sight conditions to increase coverage.

Non-stop connectivity with “Dual-WAN Failover” design

The wireless LTE allows you to take advantage of the 2nd WAN without a cabling plan. As long as the gateway supports “Dual-WAN Failover”, you can just connect Zyxel LTE7485-S905 to the existing gateway and set LTE as the failover WAN and relieve the risk of network outage.


Easy and flexible installation

Zyxel LTE7485-S905 can be easily and flexibly installed with a mounting kit supporting either wall or poll installation, an integrated 802.3af/at Gigabit PoE support, and a dedicated mobile app, which shows intuitive RF signal strength graphics for base station alignment.


Remote management for lower OPEX

With TR-069, TR-181 and TR-143 support, the Zyxel LTE7485-S905 effectively secures OPEX by reducing the frequency of on-site support and by providing simplified diagnostic, configuration and troubleshooting processes.

System specifications

IP networking
  • Supports IPv4/IPv6 dual stack (NDP IPv6)
  • DHCP server
  • Supports ICMP
  • Virtual Private Network (VPN) pass-through
  • Supports NAT/NAPT
  • Supports DMZ
  • Supports port forwarding/triggering
  • Supports ALG
  • Supports bridge/router modes
  • Supports dynamic DNS for first APN
  • Supports remote management under bridge mode
IP firewall
  • Firewall can be enabled or disabled via GUI
  • DoS attack prevention
  • Supports SPI
  • Application-level firewall
  • Filters LAN MAC address
  • Filters LAN IP address
  • Supports local/remote device management and firmware upgrade via TR-069 and web GUI
  • APN management
  • PIN management
  • CLI/SSH (local and remote SSH access)
  • Supports UPNP IGD
  • Supports SSH with key access
  • Supports bandwidth management
  • Supports mobile apps (iOS and Android)
  • Supports remote throughput testing (TR-143)
  • LTE Band Pilot system management compatible
  • SAS client built-in

Hardware specifications

LTE interface
  • Standard-compliant: 3GPP UE Category 16
  • Supports LTE band 48 (CBRS) (LTE TDD 3550-3700 MHz)
  • CBRS Category B CPE-CBSD
  • Supports DL TM1/2/3/4/6/7/8/9
  • LTE antennas: 4 embedded directional antennas of up to 13 dBi per element (4x4 MIMO)
  • Supports DL 2CC, 4x4 MIMO, 8 spatial streams
  • Supports DL up to 4 Carrier Aggregations, UL up to 2 Carrier Aggregations
  • Supports DL modulations: QPSK, 16-QAM, 64-QAM and 256-QAM
  • Supports UL modulations: QPSK, 16-QAM and 64-QAM
  • Supports DL speeds of up to 580 Mbps by TDD conf. 2*
  • Supports UL speeds of up to 30.2 Mbps by TDD conf. 2*
  • Max EIRP 36 dBm/10 MHz
WiFi interface for management
  • 802.11 n/g/b, 2.4 GHz
  • Hidden SSID
  • MAC address filtering
  • 2 embedded antennas
  • For local management purpose only
Hardware interface
  • One Gigabit RJ-45 PoE LAN port
  • One tri-color LED indicator for:
    • Power status
    • Internet status
    • WiFi status
  • One 3FF Micro SIM card socket
  • One WiFi on/off and WPS button
  • One reset and reboot button

Power interface

  • Standard 802.3af/at Power over Ethernet (PoE) PD support compatible
  • Power consumption at PoE: 13 W (peak)

Physical specifications

  • Item dimensions (WxDxH): 254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
  • Item weight: 1100 g (2.43 lb.)
  • Packing dimensions (WxDxH): 420 x 280 x 108 mm (16.54” x 11.02” x 4.25”)
  • Packing weight: 3050 g (6.72 lb.)

Environment specifications

Ingress Protection rating
  • IP68
Lightning protection
  • K.21 enhanced mode, 6 KV
Operating environment
  • Temperature: -40°C to 60°C (- 40°F to 140°F)
  • Humidity: 5% to 95% (non-condensing)
Storage environment
  • Temperature: -40°C to 70°C (-40°F to 158°F)
  • Humidity: 5% to 95% (non-condensing)


  • FCC
  • OnGo

Package contents

  • Gigabit PoE injector
  • Ethernet cable
  • Cable gland
  • Quick Start Guide
  • Wall/pole mounting kit
  • Grounding kit

* All specifications are subject to change without notice.



File type Model Version Release date Language Download
Datasheet LTE7485-S905 1 July 30, 2020 English
Quick Start Guide LTE7485-S905 001 August 4, 2020 English
Users Guide LTE7485-S905 1.00_2.00 ED6 August 4, 2020 English

Contact us


Information here.